ResearchSpace

Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials

Show simple item record

dc.contributor.author De Beer, Morris
dc.contributor.author Van Rensburg, Yvette
dc.date.accessioned 2017-08-22T13:08:39Z
dc.date.available 2017-08-22T13:08:39Z
dc.date.issued 2015-08
dc.identifier.citation De Beer, M. and Van Rensburg, Y. 2015. Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials. In: The 11th Conference on Asphalt Pavements for Southern Africa, Sun City, South Africa, 16-19 August 2015, 19pp. en_US
dc.identifier.uri https://trid.trb.org/view.aspx?id=1404773
dc.identifier.uri http://hdl.handle.net/10204/9457
dc.description Copyright: 2015 Scatterlings Conference Secretariat. Due to copyright restrictions, the attached PDF file only contains the abstract of the full text item. For access to the full text item, kindly consult the publisher's website. en_US
dc.description.abstract Recently, analyses on Stress-in-Motion (SIM) data of heavy vehicles (HVs) from National Road 3 (N3) indicated that there are un-equal loading on dual tyre configurations. It was shown that the mass of approximately 70 percent of the outside tyres in a dual pair are lower than the average mass on the dual pair, and only 30 percent higher. In South Africa the majority of HVs do incorporate dual tyre configurations, especially on drive axles. Analysis of consolidated tyre contact stress and tyre inflation pressure data in addition to tyre loading resulted in a rough empirical estimate of tyre inflation pressure directly from SIM contact stress measurements. In an ideal world, an instrument such as the SIM could be invaluable in not only capturing the tyre loading and contact stresses, but also estimate the tyre inflation pressure of individual tyres on the fly. With this in mind, SIM experiments were completed where dual truck tyre configurations with different tyre inflation pressures were used under the Heavy Vehicle Simulator (HVS). General assumptions in road pavement design of equal load sharing between all tyres, axles and axles groups for heavy vehicles are challenged, including damaging effects from dual tyre pairs with differential tyre pressures. The aim of this paper is to present data with associated pavement analysis where dual pair truck tyre configurations with tyre inflation pressures differentials (TIPD) were used as input. Preliminary investigations indicated that over a total load range of 30 kN to 100 kN on a dual truck tyre pair with a rigid axle, and tyre inflation pressure differences ranging between 19 percent and 83 percent, the resultant individual tyre load differences ranged from 13 percent to 52 percent. The difference in resultant tyre loading as a direct result of TIPDs is investigated in this paper with respect to the structural response and associated behaviour of typical thinly surfaced flexible asphalt pavements. It is recommended that design factors be developed to incorporate the damaging effect of a typical dual pair of truck tyres with TIPD in structural road pavement design. The wider extent, degree and impact, however, of TIPD in dual tyres on a range of typical flexible pavements need to be further quantified in future. en_US
dc.language.iso en en_US
dc.relation.ispartofseries Worklist;15961
dc.subject Asphalt pavements en_US
dc.subject Heavy vehicles en_US
dc.subject Heavy vehicles en_US
dc.subject Tyre inflation pressures en_US
dc.subject Stress-in-Motion en_US
dc.subject SIM en_US
dc.title Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials en_US
dc.type Conference Presentation en_US
dc.identifier.apacitation De Beer, M., & Van Rensburg, Y. (2015). Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials. http://hdl.handle.net/10204/9457 en_ZA
dc.identifier.chicagocitation De Beer, Morris, and Yvette Van Rensburg. "Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials." (2015): http://hdl.handle.net/10204/9457 en_ZA
dc.identifier.vancouvercitation De Beer M, Van Rensburg Y, Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials; 2015. http://hdl.handle.net/10204/9457 . en_ZA
dc.identifier.ris TY - Conference Presentation AU - De Beer, Morris AU - Van Rensburg, Yvette AB - Recently, analyses on Stress-in-Motion (SIM) data of heavy vehicles (HVs) from National Road 3 (N3) indicated that there are un-equal loading on dual tyre configurations. It was shown that the mass of approximately 70 percent of the outside tyres in a dual pair are lower than the average mass on the dual pair, and only 30 percent higher. In South Africa the majority of HVs do incorporate dual tyre configurations, especially on drive axles. Analysis of consolidated tyre contact stress and tyre inflation pressure data in addition to tyre loading resulted in a rough empirical estimate of tyre inflation pressure directly from SIM contact stress measurements. In an ideal world, an instrument such as the SIM could be invaluable in not only capturing the tyre loading and contact stresses, but also estimate the tyre inflation pressure of individual tyres on the fly. With this in mind, SIM experiments were completed where dual truck tyre configurations with different tyre inflation pressures were used under the Heavy Vehicle Simulator (HVS). General assumptions in road pavement design of equal load sharing between all tyres, axles and axles groups for heavy vehicles are challenged, including damaging effects from dual tyre pairs with differential tyre pressures. The aim of this paper is to present data with associated pavement analysis where dual pair truck tyre configurations with tyre inflation pressures differentials (TIPD) were used as input. Preliminary investigations indicated that over a total load range of 30 kN to 100 kN on a dual truck tyre pair with a rigid axle, and tyre inflation pressure differences ranging between 19 percent and 83 percent, the resultant individual tyre load differences ranged from 13 percent to 52 percent. The difference in resultant tyre loading as a direct result of TIPDs is investigated in this paper with respect to the structural response and associated behaviour of typical thinly surfaced flexible asphalt pavements. It is recommended that design factors be developed to incorporate the damaging effect of a typical dual pair of truck tyres with TIPD in structural road pavement design. The wider extent, degree and impact, however, of TIPD in dual tyres on a range of typical flexible pavements need to be further quantified in future. DA - 2015-08 DB - ResearchSpace DP - CSIR KW - Asphalt pavements KW - Heavy vehicles KW - Heavy vehicles KW - Tyre inflation pressures KW - Stress-in-Motion KW - SIM LK - https://researchspace.csir.co.za PY - 2015 T1 - Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials TI - Pavement damaging effects from dual tyre configurations of heavy vehicles with tyre inflation pressure differentials UR - http://hdl.handle.net/10204/9457 ER - en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record