ResearchSpace

Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles

Show simple item record

dc.contributor.author Dollar, LH
dc.contributor.author Dollar, ESJ
dc.contributor.author Moolman, J
dc.date.accessioned 2007-07-03T10:13:09Z
dc.date.available 2007-07-03T10:13:09Z
dc.date.issued 2006-07
dc.identifier.citation Dollar, LH, Dollar, ESJ and Moolman, J. 2006. Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles. Water SA, Vol. 32(3), pp 395-402 en
dc.identifier.issn 0378-4738
dc.identifier.uri http://hdl.handle.net/10204/878
dc.description Copyright: 2006 Water Research Commission en
dc.description.abstract This paper presents an automated desktop procedure for delineating river longitudinal profiles into macro-reaches for use in Ecological Reserve assessments and to aid freshwater ecosystem conservation planning. The procedure was developed for use where there are limited data and/or where a repeatable, statistically defensible regional or national assessment is required. The delineation of longitudinal profiles into macro-reaches between 'controls' or 'break points' such as exposed resistant rock formations, knick points, or significant changes in lithology provides the initial coarse filter for further assessment of lower levels of organisation, channel type for example. The division is necessary, as research has demonstrated that not all macro-reaches respond in the same way to disturbance or stress, nor do they have the same biotic assemblages. Four statistical methods (Von Neumann mean square error, CUSUM plots or unweighted values and the Worsley Likelihood Ratio Test (WLRT)) were used to define macro-reach breaks for four South African rivers (Crocodile, Olifants, Mhlathuze and Seekoei Rivers) and were compared to previously defined macro-reach delineations based on expert-driven approaches. Results indicate that the CUSUM and WLRT approaches most closely match the macro-reach breakpoints as defined by the expert-driven approach. An automated desktop procedure was developed for computing statistically defensible, multiple change points along profiles using an adaptation of the WLRT method. The adapted approach does not require an a priori knowledge of the break points, as is the case in other applications of the WLRT. It is concluded that the adapted WLRT approach can be used with a reasonable degree of certainty where there are insufficient data and/or where a regional or national assessment is required that is repeatable and statistically defensible. Where possible, however, there is no substitute for primary data collection, field work and a detailed expert-driven approach. en
dc.language.iso en en
dc.publisher Water Research Commission en
dc.subject Ecological reserves en
dc.subject River classification en
dc.subject WLRT en
dc.subject Longitudinal profiles en
dc.subject South African National Water Act en
dc.subject Macro-reaches en
dc.subject Ecostatus en
dc.title Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles en
dc.type Article en
dc.identifier.apacitation Dollar, L., Dollar, E., & Moolman, J. (2006). Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles. http://hdl.handle.net/10204/878 en_ZA
dc.identifier.chicagocitation Dollar, LH, ESJ Dollar, and J Moolman "Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles." (2006) http://hdl.handle.net/10204/878 en_ZA
dc.identifier.vancouvercitation Dollar L, Dollar E, Moolman J. Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles. 2006; http://hdl.handle.net/10204/878. en_ZA
dc.identifier.ris TY - Article AU - Dollar, LH AU - Dollar, ESJ AU - Moolman, J AB - This paper presents an automated desktop procedure for delineating river longitudinal profiles into macro-reaches for use in Ecological Reserve assessments and to aid freshwater ecosystem conservation planning. The procedure was developed for use where there are limited data and/or where a repeatable, statistically defensible regional or national assessment is required. The delineation of longitudinal profiles into macro-reaches between 'controls' or 'break points' such as exposed resistant rock formations, knick points, or significant changes in lithology provides the initial coarse filter for further assessment of lower levels of organisation, channel type for example. The division is necessary, as research has demonstrated that not all macro-reaches respond in the same way to disturbance or stress, nor do they have the same biotic assemblages. Four statistical methods (Von Neumann mean square error, CUSUM plots or unweighted values and the Worsley Likelihood Ratio Test (WLRT)) were used to define macro-reach breaks for four South African rivers (Crocodile, Olifants, Mhlathuze and Seekoei Rivers) and were compared to previously defined macro-reach delineations based on expert-driven approaches. Results indicate that the CUSUM and WLRT approaches most closely match the macro-reach breakpoints as defined by the expert-driven approach. An automated desktop procedure was developed for computing statistically defensible, multiple change points along profiles using an adaptation of the WLRT method. The adapted approach does not require an a priori knowledge of the break points, as is the case in other applications of the WLRT. It is concluded that the adapted WLRT approach can be used with a reasonable degree of certainty where there are insufficient data and/or where a regional or national assessment is required that is repeatable and statistically defensible. Where possible, however, there is no substitute for primary data collection, field work and a detailed expert-driven approach. DA - 2006-07 DB - ResearchSpace DP - CSIR KW - Ecological reserves KW - River classification KW - WLRT KW - Longitudinal profiles KW - South African National Water Act KW - Macro-reaches KW - Ecostatus LK - https://researchspace.csir.co.za PY - 2006 SM - 0378-4738 T1 - Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles TI - Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles UR - http://hdl.handle.net/10204/878 ER - en_ZA


Files in this item

This item appears in the following Collection(s)

Show simple item record