Industrial heat treatment of R-HPDC A356 automotive brake callipers [Conference paper]

Abstract

Heat treatment of rheo-high pressure die cast (R-HPDC) A356 brake callipers has produced good mechanical properties on the laboratory scale. An industrial heat treatment is required to evaluate the applicability and conformance of the R-HPDC A356 brake callipers to the automotive industry. This research studied A356 brake callipers heat treated on the industrial scale with particular emphasis on the resulting microstructure, hardness and tensile properties. The eutectic Si-particle spheroidisation after solution heat treatment was achieved and observed with optical microscopy. A hardness increase from 64 to 100 Vickers was achieved from the as-cast condition to the industrially heat treated T6 condition. The heat treatment caused no significant variation in hardness and tensile properties from brake callipers within the same batch or from different batches. The yield and ultimate strengths of the industrial heat treated brake callipers were lower compared to the laboratory scale heat treatment properties, while the ductility increased, mainly due to quenching effects. Even though the industrial heat treated A356 brake callipers resulted in yield and ultimate tensile strengths lower than those achieved on a laboratory scale, they still exceeded the minimum specifications for gravity die cast A356 brake callipers.