ResearchSpace

Mechanical alloying and sitering of TI - 10WT.% MG powders

Show simple item record

dc.contributor.author Machio, Christopher N
dc.contributor.author Nyabadza, D
dc.contributor.author Chikwanda, HK
dc.contributor.author Phasha, M
dc.contributor.author Sibanda, VM
dc.date.accessioned 2009-08-12T07:58:12Z
dc.date.available 2009-08-12T07:58:12Z
dc.date.issued 2009-06
dc.identifier.citation Machio, C.N., Nyabadza, D, Chikwanda, HK et al. 2009. Mechanical alloying and sitering of TI - 10WT.% MG powders. 4th International Light Metals Technology Conference, Queensland, Australia, 28 June-1 July, 2009. pp 1-4 en
dc.identifier.issn 1662-9752
dc.identifier.uri http://hdl.handle.net/10204/3528
dc.description This is author's own work. This paper is also published by Materials Science Forum en
dc.description.abstract A Ti-10wt.%Mg powder alloy has been produced by mechanical alloying. Elemental powders of Ti and Mg were ball milled in a Zoz-Simoloyer CM01 for 16 and 20 hours under argon. Mechanical alloying was followed by XRD, SEM and particle size analysis. Test specimens of the milled powders were produced by cold compaction and sintering (under argon). The milling resulted into a fcc TiMg solid solution for both milling durations. Sintering leads to a partial decomposition of the fcc TiMg to hcp TiMg and Ti. en
dc.language.iso en en
dc.subject Alloys en
dc.subject Mechanical alloying en
dc.subject Titanium en
dc.subject TI - 10WT.% MG powders en
dc.subject Magnesium en
dc.subject Mg en
dc.subject Light metals technology conference en
dc.subject Elemental powder en
dc.subject Powder characterization en
dc.subject Zoz-Simoloyer CM01 en
dc.subject XRD particle size analysis en
dc.subject SEM particle size analysis en
dc.subject fcc TiMg solid solution en
dc.subject Sintering en
dc.title Mechanical alloying and sitering of TI - 10WT.% MG powders en
dc.type Article en
dc.identifier.apacitation Machio, C. N., Nyabadza, D., Chikwanda, H., Phasha, M., & Sibanda, V. (2009). Mechanical alloying and sitering of TI - 10WT.% MG powders. http://hdl.handle.net/10204/3528 en_ZA
dc.identifier.chicagocitation Machio, Christopher N, D Nyabadza, HK Chikwanda, M Phasha, and VM Sibanda "Mechanical alloying and sitering of TI - 10WT.% MG powders." (2009) http://hdl.handle.net/10204/3528 en_ZA
dc.identifier.vancouvercitation Machio CN, Nyabadza D, Chikwanda H, Phasha M, Sibanda V. Mechanical alloying and sitering of TI - 10WT.% MG powders. 2009; http://hdl.handle.net/10204/3528. en_ZA
dc.identifier.ris TY - Article AU - Machio, Christopher N AU - Nyabadza, D AU - Chikwanda, HK AU - Phasha, M AU - Sibanda, VM AB - A Ti-10wt.%Mg powder alloy has been produced by mechanical alloying. Elemental powders of Ti and Mg were ball milled in a Zoz-Simoloyer CM01 for 16 and 20 hours under argon. Mechanical alloying was followed by XRD, SEM and particle size analysis. Test specimens of the milled powders were produced by cold compaction and sintering (under argon). The milling resulted into a fcc TiMg solid solution for both milling durations. Sintering leads to a partial decomposition of the fcc TiMg to hcp TiMg and Ti. DA - 2009-06 DB - ResearchSpace DP - CSIR KW - Alloys KW - Mechanical alloying KW - Titanium KW - TI - 10WT.% MG powders KW - Magnesium KW - Mg KW - Light metals technology conference KW - Elemental powder KW - Powder characterization KW - Zoz-Simoloyer CM01 KW - XRD particle size analysis KW - SEM particle size analysis KW - fcc TiMg solid solution KW - Sintering LK - https://researchspace.csir.co.za PY - 2009 SM - 1662-9752 T1 - Mechanical alloying and sitering of TI - 10WT.% MG powders TI - Mechanical alloying and sitering of TI - 10WT.% MG powders UR - http://hdl.handle.net/10204/3528 ER - en_ZA


Files in this item

Thumbnail
Name: Machio_2009.pdf
Size: 2.440Mb
Format: PDF
View/Open

This item appears in the following Collection(s)

Show simple item record