This study introduces a new scale for weighing individual tyres of slow moving vehicles. The new technology is referred to as “Stress - In – Motion” or SIM and is statistically compared with an existing Weigh-In-Motion (WIM) scale (DAW 50) and a Multi-Deck Static scale at the N3 Traffic Control Centre (N3-TCC), near Heidelberg. The raw data was validated for quality, resulting in a total usable sample of 2 297 trucks (12 830 axles) from the SIM device. The validated paired data indicated that the SIM data compares very linearly to the mass weight results of both the DAW 50 and Static scales. However, he SIM data underestimated the average gross vehicle Mass (GVM), or gross combination mass (GCM) by 6 to 7 per cent compared to the DAW 50 and Static scales, at levels of significance of a = 1, 5 and 10 per cent. Similar findings were made on the paired data of the axle groups and single axle mass weights. The relative prediction limits of the SIM device ranges between +/- 0.6 tonnes to +/- 4.1 tonnes, depending on the confidence level and mass weight configuration. The precision of the scales were also studied using the well known repeatability (r) and Reproducibility (R) concepts. Four dedicated trucks were measured repeatedly on different days over the three scales. Although standard mass weight limits for r and R were achieved at a a = 5 per cent level of significance, more replica measurements are needed to further improve on the qualification of the precision limits of the SIM system, as well as for the Static and DAW 50 scales.
Reference:
Mkhize, Z.Q.P. and De Beer, M. 2005. Statistical analysis of vehicle loads measured with three different vehicle weighing devices. SATC 2005: The 24th Annual Southern African Transport Conference and Exhibition, Pretoria, South Africa, 11-13 July, 2005, pp. 1-19
Mkhize, Z., & De Beer, M. (2005). Statistical analysis of vehicle loads measured with three different vehicle weighing devices. http://hdl.handle.net/10204/1866
Mkhize, ZQP, and Morris De Beer. "Statistical analysis of vehicle loads measured with three different vehicle weighing devices." (2005): http://hdl.handle.net/10204/1866
Mkhize Z, De Beer M, Statistical analysis of vehicle loads measured with three different vehicle weighing devices; 2005. http://hdl.handle.net/10204/1866 .
Author:Nordengen, Paul A; Oberholzer, FDate:Jul 2004Heavy vehicle overloading continues to be a major problem in South Africa notwithstanding efforts at more effective overload control by the authorities. This paper describes a pilot project, funded by the Department of Trade and Industry and ...Read more
Author:Nordengen, Paul A; Oberholtzer, FDate:Jun 2006Heavy vehicle overloading and road safety continue to be major problems in South Africa notwithstanding efforts at more effective enforcement by the road and traffic authorities. Overloading causes premature road deterioration and, together ...Read more
Author:Dessein, T; Kienhöfer, F; Nordengen, Paul ADate:Mar 2010The preliminary design of a South African PBS vehicle to transport large-bore welded steel pipes is an important milestone in developing local expertise to analyse PBS designs. The design approach has drawn extensively from the PBS measures ...Read more