dc.contributor.author |
Loveday, Philip W
|
en_US |
dc.contributor.author |
Rogers, CA
|
en_US |
dc.date.accessioned |
2007-02-08T07:53:19Z |
en_US |
dc.date.accessioned |
2007-06-07T10:04:15Z |
|
dc.date.available |
2007-02-08T07:53:19Z |
en_US |
dc.date.available |
2007-06-07T10:04:15Z |
|
dc.date.issued |
1998-09 |
en_US |
dc.identifier.citation |
Loveday, PW and Rogers, CA. 1998. Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control. IEEE Transactions on Ultrasonic Ferroelectrics and Frequency Control, vol 45(5), pp 1211-1215 |
en_US |
dc.identifier.issn |
0885-3010 |
en_US |
dc.identifier.uri |
http://hdl.handle.net/10204/1655
|
en_US |
dc.identifier.uri |
http://hdl.handle.net/10204/1655
|
|
dc.identifier.uri |
https://ieeexplore.ieee.org/abstract/document/726445
|
|
dc.identifier.uri |
DOI: 10.1109/58.726445
|
|
dc.description.abstract |
A method for analyzing the effect of feedback control on the dynamics of piezoelectric resonators used in vibratory gyroscopes has been developed. This method can be used to determine the feasibility of replacing the traditional mechanical balancing operations, used to adjust the resonant frequency, by displacement feedback and for determining the velocity feedback required to produce a particular bandwidth. Experiments were performed on a cylindrical resonator with discrete piezoelectric actuation and sensing elements to demonstrate the principles. Good agreement between analysis and experiment was obtained, and it was shown that this type of resonator could be balanced by displacement feedback. The analysis method presented also is applicable to micromachined piezoelectric gyroscopes |
en_US |
dc.format.extent |
329256 bytes |
en_US |
dc.format.mimetype |
application/pdf |
en_US |
dc.language.iso |
en |
en_US |
dc.publisher |
Institute of Electrical and Electronics Engineers Inc |
en_US |
dc.rights |
Copyright: 1998 Institute of Electrical and Electronics Engineering Inc |
en_US |
dc.subject |
Micromachined piezoelectric gyroscopes |
en_US |
dc.subject |
Vibratory gyroscopics |
en_US |
dc.subject |
Cylindrical resonator |
en_US |
dc.subject |
Electrical engineering |
en_US |
dc.title |
Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control |
en_US |
dc.type |
Article |
en_US |
dc.identifier.apacitation |
Loveday, P. W., & Rogers, C. (1998). Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control. http://hdl.handle.net/10204/1655 |
en_ZA |
dc.identifier.chicagocitation |
Loveday, Philip W, and CA Rogers "Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control." (1998) http://hdl.handle.net/10204/1655 |
en_ZA |
dc.identifier.vancouvercitation |
Loveday PW, Rogers C. Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control. 1998; http://hdl.handle.net/10204/1655. |
en_ZA |
dc.identifier.ris |
TY - Article
AU - Loveday, Philip W
AU - Rogers, CA
AB - A method for analyzing the effect of feedback control on the dynamics of piezoelectric resonators used in vibratory gyroscopes has been developed. This method can be used to determine the feasibility of replacing the traditional mechanical balancing operations, used to adjust the resonant frequency, by displacement feedback and for determining the velocity feedback required to produce a particular bandwidth. Experiments were performed on a cylindrical resonator with discrete piezoelectric actuation and sensing elements to demonstrate the principles. Good agreement between analysis and experiment was obtained, and it was shown that this type of resonator could be balanced by displacement feedback. The analysis method presented also is applicable to micromachined piezoelectric gyroscopes
DA - 1998-09
DB - ResearchSpace
DP - CSIR
KW - Micromachined piezoelectric gyroscopes
KW - Vibratory gyroscopics
KW - Cylindrical resonator
KW - Electrical engineering
LK - https://researchspace.csir.co.za
PY - 1998
SM - 0885-3010
T1 - Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control
TI - Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control
UR - http://hdl.handle.net/10204/1655
ER -
|
en_ZA |