dc.contributor.author |
Loveday, PW
|
|
dc.contributor.author |
Long, Craig S
|
|
dc.date.accessioned |
2022-08-15T07:20:00Z |
|
dc.date.available |
2022-08-15T07:20:00Z |
|
dc.date.issued |
2022-11 |
|
dc.identifier.citation |
Loveday, P. & Long, C.S. 2022. Numerical analysis of guided wave transmission through a long defect in a rail rack. <i>Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4).</i> http://hdl.handle.net/10204/12465 |
en_ZA |
dc.identifier.issn |
2572-3898 |
|
dc.identifier.issn |
2572-3901 |
|
dc.identifier.uri |
https://doi.org/10.1115/1.4054790
|
|
dc.identifier.uri |
http://hdl.handle.net/10204/12465
|
|
dc.description.abstract |
Guided wave ultrasound has been used to continuously monitor welded rail track by transmitting guided wave ultrasound between alternate transmit and receive stations along the rail. A section of rail was encountered where transmission was not reliably achieved. It was found that there was considerable flank wear on the head of the rail, which varied in a sinusoidal pattern over approximately 10 m. The scattering due to the wear is investigated in this paper using numerical modeling. A 3D finite element (FE) model of the section of rail containing the wear defect was coupled to two semi-analytical finite element models of the incoming and outgoing waveguides. In the case of a 10 m long defect, which is over 100 wavelengths long, the 3D FE matrices were excessively large, and the global matrices could not be assembled nor solved. An approach of successively assembling layers of the mesh and reducing out internal degrees-of-freedom in the dynamic stiffness matrix was successfully adopted. The influence of the length of wear on the transmission loss was computed. It was found that short wear lengths generally cause more transmission loss although the relationship is not monotonic. It was found that the long-wear seen in the field does not cause transmission loss. In this case, where the change in cross section is gradual the incoming mode converted to a single mode in the smallest cross section and this mode converted back to the incoming mode in the second half of the wear section. |
en_US |
dc.format |
Abstract |
en_US |
dc.language.iso |
en |
en_US |
dc.relation.uri |
https://asmedigitalcollection.asme.org/nondestructive/article-abstract/5/4/041006/1141593/Numerical-Analysis-of-Guided-Wave-Transmission?redirectedFrom=fulltext |
en_US |
dc.source |
Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4) |
en_US |
dc.subject |
3D finite element |
en_US |
dc.subject |
Elastic wave |
en_US |
dc.subject |
Numerical analysis |
en_US |
dc.subject |
Rail rack |
en_US |
dc.subject |
Ultrasonics |
en_US |
dc.subject |
Wave propagation modeling |
en_US |
dc.title |
Numerical analysis of guided wave transmission through a long defect in a rail rack |
en_US |
dc.type |
Article |
en_US |
dc.description.pages |
8 |
en_US |
dc.description.note |
Copyright © 2022 by ASME. Due to copyright restrictions, the attached PDF file only contains the abstract of the full text item. For access to the full text item, please consult the publisher's website: https://doi.org/10.1115/1.4054790 |
en_US |
dc.description.cluster |
Manufacturing |
en_US |
dc.description.impactarea |
Industrial Sensors |
en_US |
dc.identifier.apacitation |
Loveday, P., & Long, C. S. (2022). Numerical analysis of guided wave transmission through a long defect in a rail rack. <i>Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4)</i>, http://hdl.handle.net/10204/12465 |
en_ZA |
dc.identifier.chicagocitation |
Loveday, PW, and Craig S Long "Numerical analysis of guided wave transmission through a long defect in a rail rack." <i>Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4)</i> (2022) http://hdl.handle.net/10204/12465 |
en_ZA |
dc.identifier.vancouvercitation |
Loveday P, Long CS. Numerical analysis of guided wave transmission through a long defect in a rail rack. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4). 2022; http://hdl.handle.net/10204/12465. |
en_ZA |
dc.identifier.ris |
TY - Article
AU - Loveday, PW
AU - Long, Craig S
AB - Guided wave ultrasound has been used to continuously monitor welded rail track by transmitting guided wave ultrasound between alternate transmit and receive stations along the rail. A section of rail was encountered where transmission was not reliably achieved. It was found that there was considerable flank wear on the head of the rail, which varied in a sinusoidal pattern over approximately 10 m. The scattering due to the wear is investigated in this paper using numerical modeling. A 3D finite element (FE) model of the section of rail containing the wear defect was coupled to two semi-analytical finite element models of the incoming and outgoing waveguides. In the case of a 10 m long defect, which is over 100 wavelengths long, the 3D FE matrices were excessively large, and the global matrices could not be assembled nor solved. An approach of successively assembling layers of the mesh and reducing out internal degrees-of-freedom in the dynamic stiffness matrix was successfully adopted. The influence of the length of wear on the transmission loss was computed. It was found that short wear lengths generally cause more transmission loss although the relationship is not monotonic. It was found that the long-wear seen in the field does not cause transmission loss. In this case, where the change in cross section is gradual the incoming mode converted to a single mode in the smallest cross section and this mode converted back to the incoming mode in the second half of the wear section.
DA - 2022-11
DB - ResearchSpace
DP - CSIR
J1 - Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 5(4)
KW - 3D finite element
KW - Elastic wave
KW - Numerical analysis
KW - Rail rack
KW - Ultrasonics
KW - Wave propagation modeling
LK - https://researchspace.csir.co.za
PY - 2022
SM - 2572-3898
SM - 2572-3901
T1 - Numerical analysis of guided wave transmission through a long defect in a rail rack
TI - Numerical analysis of guided wave transmission through a long defect in a rail rack
UR - http://hdl.handle.net/10204/12465
ER -
|
en_ZA |
dc.identifier.worklist |
25938 |
en_US |